Hello guys, Welcome to Africa's Largest Video Search Engine, and you are watching G83 Peck Drilling for Deeper Hole || I j k p use in Drilling Canned Cycle || Reduce Cycle Time. and this video is uploaded by Amazing Gyan Tech at 2021-06-05T20:30:12-07:00. We are just promoting this video only for entertainment and educational purpose only. I hop you like our Video Search Engine. [NyLjX2rChqA]
| Name | G83 Peck Drilling for Deeper Hole || I j k p use in Drilling Canned Cycle || Reduce Cycle Time |
| Video Uploader | Video From Amazing Gyan Tech |
| Upload Date | This Video Uploaded At 06-06-2021 03:30:12 |
| Video Discription | G83 Peck Drilling for Deeper Hole || I j k p use in Drilling Canned Cycle || Reduce Cycle Time * E - Chip-clean RPM (Spindle reverses to remove chips after each cycle) F - Feedrate * I - Size of first peck depth * J - Amount to reduce peck depth each pass * K - Minimum depth of peck * L - Number of holes if G91 (Incremental Mode) is used, also G81 through G89. * P - Pause at end of last peck, in seconds (Dwell) * Q - Peck depth, always incremental * R - Position of the R plane (position above the part) * X - X-Axis location of hole * Y - Y-Axis location of hole Z - Position of the Z-Axis at the bottom of hole * indicates optional If I, J, and K are specified, the first pass will cut in by the amount of I, each succeeding cut will be reduced by amount J, and the minimum cutting depth is K. Do not use a Q value when programming with I, J, and K. If P is specified, the tool will pause at the bottom of the hole for that amount of time. The following example will peck several times and dwell for 1.5 seconds: G83 Z-0.62 F15. R0.1 Q0.175 P1.5 ; The same dwell time will apply to all subsequent blocks that do not specify a dwell time. G83 Peck Drilling with I, J, K and Normal Peck Drilling Setting 52 changes the way G83 works when it returns to the R plane. Usually the R plane is set well above the cut to ensure that the peck motion allows the chips to get out of the hole. This wastes time as the drill starts by drilling empty space. If Setting 52 is set to the distance required to clear chips, you can set the R plane much closer to the part. When the chip-clearing move to R occurs, Setting 52 determines the Z-Axis distance above R. G83 peck Drilling Canned Cycle with Setting 52 O60831 (G83 PECK DRILLING CANNED CYCLE) ; (G54 X0 Y0 is at the top-left of part) ; (Z0 is on top of the part) ; (T1 is a 0.3125 in. stub drill) ; (BEGIN PREPARATION BLOCKS) ; T1 M06 (Select tool 1) ; G00 G90 G40 G49 G54 (Safe startup) ; G00 G54 X2. Y-2. (Rapid to 1st position) ; S1000 M03 (Spindle on CW) ; G43 H01 Z0.1 (Activate tool offset 1) ; M08 (Coolant on) ; (BEGIN CUTTING BLOCKS) ; G83 Z-0.720 Q0.175 R0.1 F15.(Begin G83) ; (Drill 1st hole at current X Y location) ; X2. Y-4. (2nd hole) ; X4. Y-4. (3rd hole) ; X4. Y-2. (4th hole) ; (BEGIN COMPLETION BLOCKS) ; G00 Z1. M09 (Rapid retract, Coolant off) ; G53 G49 Z0 M05 (Z home, Spindle off) ; G53 Y0 (Y home) ; M30 (End program) ; #G83 peck Drilling Canned Cycle for Deeper Hole #i_j_k_p_UseDrillingProgram #vmc programming #2d programming for beginners [NyLjX2rChqA] |
| Category | Education |
| Tags | G83 Peck Drilling for Deeper Hole | i j k use in Drilling Canned Cycle | kaise drilling cycle time kam kare | vmc long drilling programming | kaise drilling program lekhe i j k p use karke | Amazing Gyan Tech | hass automation | hass machine programming tutorial for beginner | vmc 2d programming | why i j k use in drilling program |
