Hello guys, Welcome to Africa's Largest Video Search Engine, and you are watching Making a Liner Lock the Easy Way - Part 1. and this video is uploaded by USAKnifemaker at 2016-12-02T14:25:08-08:00. We are just promoting this video only for entertainment and educational purpose only. I hop you like our Video Search Engine. [GUUgf3sOor0]
| Name | Making a Liner Lock the Easy Way - Part 1 |
| Video Uploader | Video From USAKnifemaker |
| Upload Date | This Video Uploaded At 02-12-2016 22:25:08 |
| Video Discription | Most knife makers don't make folders. I hope to change that a bit. This process uses hardened drill template patterns to help in the fabrication of a liner lock. The goal is to make available the patterns, that guys who are new to folder making, can use. There may be a blatant "buy this" from us kinda thing going on here, but I'll try and keep that to a minimum. Metal: .125" or 1/8 CPMS35VN for the blade - this should be slightly oversize and you bring it to thickness .070" Ti for the liners - I've done these in .070" up to .125" I'd suggest .070" for your first. Parts list: (2) 3/16" thick g10 or Micarta(tm) material for the scales (1) 3/16" thick g10 material for the spacer bar. (1) 3-hole Ti pocket clip (2) 6-64 disc pivot heads (1) barrel pivot threaded 6-64 ID and 3/16" OD" (6) 1/2" 2-56 button head screws (4) 3/8" 2-56 button head screws (1) 1/8" stop pin (1) 2mm ceramic detent ball (2) .015" thick PB washers in 3/16" ID and 3/8" OD (1) thumb shredder thumb stud (1) 1/4" 2-56 button head screw for thumb stud Tools required: caliper or micrometer to measure your parts and metals vice grips style pliers surface plate or machinist parallels (or both) or something dead flat to check the metal layout fluid carbide scribe drill press #49 drill #13 drill 3/16" drill 1/8" drill 1/8" reamer 3/16" reamer #19 drill #42 drill for through holes for the 2-56 screws Dremel or other rotary tool with cut off wheels grinder of your choice disc grinder to debur is optional but darn nice, other wise sand paper on a flat surface a half ton hand arbor press or a bench vice to straighten metal if need be. (There are other ways to straighten metal also.) 2-56 tap tapping fluid countersink to debur holes USAKnifemaker: http://usaknifemaker.com KnifeDogs: http://usaknifemaker.com/kdforum/ Part 1: http://www.youtube.com/watch?v=GUUgf3sOor0 Part 2: http://www.youtube.com/watch?v=IWKMyy2snQs Part 3: http://www.youtube.com/watch?v=12mxitdcVq4 Part 4: http://www.youtube.com/watch?v=ErpN4mCJy1Y Part 5: http://www.youtube.com/watch?v=1K7-vr16ZE8 Part 6: https://www.youtube.com/watch?v=XG80Eijul18 [GUUgf3sOor0] |
| Category | Education |
| Tags | Liner Lock | USAKMS | Drill Template | Knifemaking | Mickley | Knife making | knifemaker | knife maker | folder | liner locks | knives | Knife | titanium | micarta | USAKnifemaker |
